Necessary knowledge of laser printer and laser application and development

by:cycjet     2020-07-20
Frame code printer, engine code printer, nameplate printer, the sign of code printer series, steel plate printer, code vendors would introduce laser printer connection control cable before, in order to ensure the electric safety confirmation to cut off the power supply first, if you want to move the laser code machine, need to loose screw at the bottom of the first with the hand first, the bottom with moving roller, gently push laser stents, be careful not to touch is focused on the flat field lens surface, after putting in place a mobile laser printer equipment need to adjust the laser printer and the focal length of the code object, focal distance and customers when buying machine the size of the field lens, is in commonly 110 - 160 mm range. Laser printer control cable connection. 1, laser printer control cable don't cable tied together and other equipment, in order to prevent induction electromagnetic interference. 2, the control of laser printer cable don't round into a ring, similarly is also avoid misoperation control signal. 3, the control box connect the power supply of laser printer laser laser marking machine code printer to connect the power cord to the laser control box, connected to the outlet again. 4, laser code electromechanical online other high frequency equipment may affect the laser printer. 5, the laser printer use electricity needs to have good grounding line, is for the sake of users for safety. Opening and closing system of the laser printer. Laser printer USES a key switch system. Laser printer boot: will at the back of the power of the laser printer interface boat form switch according to '1', open system into the operating system code automatically. Laser code authority: stop operating operating system, will the boat on the laser control box switch according to '0', the laser printer note: before starting the laser boat switch on the control box should be in '0' state, check the connection cable is good splice, if there is a power supply is OK. Laser, was born in the middle of the 20th century, it has the nature of ordinary light on all optics, is different from the ordinary light, ultraviolet laser marking machine feature is it other than light, nature USES, it is because of its special properties, making it has extensive application in aspects such as military science, technology and industry, and the application of laser potential is infinite, has become the contemporary science and technology of the fastest growing areas. Laser application in welding. Laser energy is very dense and strong directivity, its characteristic is the welding deformation of objects are rare, joint close together and welding of deep wide is higher, so the quality of the laser welding is much higher than ordinary welding, laser welding is through the corresponding treatment after laser in material for welding position, heat make this area is rapidly melting, so as to achieve the purpose of permanent connection. Representatives of welding machine is the application of laser in welding field, in use process, the shutter open, after laser via light box and pass into the closed loop system of laser orientation, then through the inside of the bronze mirror to need to welding area, under the action of the motivation, fiber laser marking machine back and forth movement around the welding area, the energy released by moments that make fusion welding, the welding is completed. Laser application in electronic chips and wafer processing. Application in the field of representative is laser scribing technology, laser direct role in the cutting on the surface, heat from material surface, enough to produce the effect of cutting, but the heat generated by the process can cause damage to the machine itself, serious still can cause a series of problems such as removing content accumulation, experts have carried on the thorough research, research and development of laser scribing well solved the technical problems, and improve the yield, nearly five times the height of it in the cutting speed at the same time, reduced the chip size, particularly effective in increasing wafer production. In addition, in the process of the chip, the application of the laser is very important also, using a laser logo on the chip, is a good way to track was carried out on the chip, provide convenience for the management work in the process of production. Shenzhen citizen laser technology co. , LTD. Is a company committed to global customers with laser equipment and laser intelligent solutions high-tech enterprises, the company mainly research and development production _ _ _ laser marking machine - sales Laser welding machine Laser cutting machine - Laser engraving machine, the hotline: 400 - 009 - 8266 http: / / www。 szmslaser。 com/。
Custom message
Chat Online
Chat Online
Chat Online inputting...