Portable fiber optic continuous laser welding machine for sheet metal

Portable Fiber Optic Continuous Sheet Metal Laser Welding Machine
 
CYCJET portable sheet metal fiber continuous laser welding machine includes a laser welding machine body. One side of the body of the laser welding machine is provided with a welding torch head. Both ends of the outer side of the welding torch head are fixedly connected with a fixed ring, and the bottom of the fixed ring is provided with a sliding plate, the bottom of the sliding plate is provided with a sliding groove, the The inside of the slide plate the slot is slidably connected with a handle, the inside of the slide slot is provided with a threaded rod, the threaded rod penetrates the handle and is threadedly connected with the handle, the threaded rod One end penetrates the slide plate and extends to one side of the slide plate, the upper part of the slide slot is provided with a cable arrangement slot, the inside of the arrangement slot is slidably connected with a layout plate , and the layout plate number is set to be multiple. The utility model drives the threaded rod to rotate through the turntable, and the threaded rod drives the grip to slide. The position of the handle at the bottom of the welding gun head can be adjusted to facilitate welding, thus improving the operability of the welding gun head and making it suitable for more complex welding environments.
 
CYCJET portable sheet metal fiber continuous laser welding machine equipment uses continuous fiber laser generator, which can extend the fiber cable to a distance of 10-15 meters for transmission without losing power. The beam is formed through a collimator and then focused on the workpiece. The welding process on the upper surface has the advantages of high flexibility, high stability and maintenance-free.

Fiber Continuous Laser Welding Machine Main Features:
 
1. Mainly intended for the welding of thin metal plates within 2mm, which compensates for the large heat fusion of traditional hydrogen arc welding technology, which is easy to deform, and the problems of post-processing.
 
2. There are a variety of processing heads available. Different manual processing heads can be selected for various needs, such as external welding, internal welding, right angle welding, narrow edge welding, large spot welding, etc. Red light positioning. The heat input can be reduced to the low Zui demand, the gold change range of the heat affected zone is small, and the deformation caused by heat transfer is also low.
 
3. The manual processing head is light, the worker is efficient, and the welding is not easy to fatigue for a long time.
 
4. The laser welding operation is simple and convenient, both right-handed and right-handed hands can operate the machine.

Technical Parameters of Sheet Metal Laser Welding Machine Manufacturers:
 
Equipment power: 1000W, 1500W, 2000W
Fiber length: 5-10m can be customized
Working mode: continuous or modulated
Working environment temperature: 15-35 ° C
Laser Wavelength: 1064NM
Work environment humidity: <70% non-condensing
Power requirements: 380V ± 10% 3P + PE
Applicable material: veneer
Cooling system: dual temperature control cooler
Welding speed: 0-20mm / S
1000W welding range: ≤2mm
1500W welding range: ≤3mm

Portable fiber optic continuous laser welding machine, including insulation cover, winding column, connecting wire, energized terminal, fixed stud, connecting seat, handle clamp, and welding head. An insulation cover is put on the upper end of the protective box and in the inner middle of the protective box The position is welded with a winding column, the ring side of the winding column is wound with a connecting wire, the left end of the connection The cable is connected with a connection seat, the left end of the connection seat is installed with a clamping handle, and the right end of the clamping handle is installed with a welding head. The energized terminal is installed on the side and the fixed bolts are installed symmetrically on the front and rear sides of the top end of the energized terminal. This design solves the problem that the original laser welding machine does not have the function of manual welding and the welding range is limited. The utility model is reasonably structured and features manual welding. Ability to effectively improve the welding range of the laser welding machine.
 
CYCLASER is the trademark of Yuchang Industrial Company Limited. As a manufacturer, CYCJET has more than 16 years of experience in R&D intelligent inkjet coding and marking equipment and laser marking and welding equipment in Shanghai, China. The manufactured machine has a large character handheld inkjet printer, a handheld laser welding machine, an automatic welding machine, a fly laser marking machine, a high-resolution inkjet printer, a printer DOD manual jet printer, a TIJ inkjet printer.
 
Contact person: David Guo
Phone: + 86-21-59970419 ext 8008
MOB: + 86-139 1763 1707
Email: sales@cycjet.com
Web: https: //cycjet.com/
 
Reference video:

1. https://youtu.be/mrrmb6f6N3U

2. https://youtu.be/8zz8tWSv_S8

Leave a Reply

Your email address will not be published.